  2-Position Illuminated Toggle Switch
Item Number: SW2LTTL
Availability: Sorry but this item is currently not available
The TL series of miniature, LED illuminated toggle switches enhance the appearance of any design. TL's translucent toggles provide an evenly diffused and eye-catching illumination.
Electrical Capacity (Resistive Load)
- Power Level (code W): 6A @ 125V AC or 3A @ 250V AC for silver
- Logic Level (code G): 0.4VA maximum @ 28V AC/DC maximum for gold
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Other Ratings
- Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold
- Insulation Resistance: 1,000 megohms minimum @ 500V DC
- Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
- Mechanical Life: 50,000 operations minimum
- Electrical Life: 25,000 operations minimum for silver; 50,000 operations minimum for gold
- Static Capability: Withstands 20 kilovolts ESD minimum
- Nominal Operating Force: 1.9N for 17.5mm toggle; 2.5N for 11.0mm toggle
- Angle of Throw: 25o
Materials & Finishes
- Toggle: Polycarbonate
- Housing: Glass fiber reinforced polyamide
- Sealing Ring: Nitrile butadiene rubber
- Base: Diallyl phthalate (UL94V-0)
- Movable Contactor: Phosphor bronze with silver or gold plating
- Movable Contacts: Silver alloy or copper with gold plating
- Stationary Contact: Silver plus copper with silver plating or copper with gold plating
- Lamp Contacts: Beryllium copper with silver plating
- Power Terminals: Copper with silver or gold plating
- Lamp Terminals: Brass with silver plating
Environmental Data
- Operating Temp Range: -10oC through +55oC(+14oF through +131oF)
- Humidity: 90 ~ 95% humidity for 240 hours @ 40oC( 104oF)
- Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 1.75 hours
- Shock: 50G (490m/sec 2 ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
- Mounting Torque: .98Nm (8.67 lb•in) maximum
- Soldering Time & Temperature: 3 seconds @ 350oC or 5 seconds @ 270oC
- Process Seal: Not available
Standards & Certifications
- Flammability Standards: UL94V-0 base
|
